Have you ever had a broken key in the door lock?!
- Home tricks to get a broken key out of a lock
- Frequently asked questions about removing a broken key from a lock
If you are one of those people who usually struggle with their keys and put a lot of pressure on them, this problem has probably happened to you once!!
But how to solve this problem? What is the solution to remove the broken key from the lock? Can this be fixed without damaging the door lock?
If you want simple solutions to get a broken key out of a lock, you've come to the right place. It is not so difficult to remove broken keys! Of course, you must know the tricks of this work.
In this article from Rasta Choob We want to address the topic of removing the broken key from the lock. A problem that probably many of us are dealing with and should be thought about.
Therefore, if you want to find more information about this issue and get to know some simple but practical tricks to solve this problem, we recommend that you do not miss the continuation of this text.
To buy and view types The door of the building click
Home tricks to get a broken key out of a lock
Before we explain to you the tricks of this problem, we need to check a few points together:
- Which door of the building did this happen to?
- How much of the key is left in the lock?
- How much time do I need?
- Do I have a special tool to remove the broken key from the lock?
After answering the above questions, your task will become clear to a great extent. If you don't have any tools and on the other hand, you need to get out or into the environment faster, then it is better to contact a skilled professional. Otherwise, maybe the following solutions will help you and you can get the broken key out of the lock.
Do not use the rest of the broken key!
You must have seen that some people, when they break the key in the lock, use the remaining key and try to open the lock with the same key. Well, this is completely wrong and it is better to immediately discard the rest of the key. Of course, we do not recommend throwing it away because after removing the broken key, it can be reused and a new version of the key can be made.
Read more: Mitre cuts in wood and their use in wooden frames and architraves
Do not forget to use pliers!
Another way to remove a broken key is to use pliers. If you have a toolbox handy, use pliers or a narrow end. Using these two tools is not complicated at all and each of us has used these tools at least once in our life.
But the steps of using pliers or a narrow tail:
First of all, we need to look for the end of the key sticking out of the lock. When you find it, just grab it with pliers or a narrow end and pull out the key with a slight clockwise or counterclockwise movement.
If the door suddenly opens, it is better to hold the door handle with one hand and with the other hand, tighten the pliers on the remaining key and then gently move the broken key until it comes out.
If you have a spare key, it is better to take out the broken key and use the replacement key. You can throw away the broken key in such a situation.
If it is difficult to remove the broken key from the lock, you can grease the inside of the lock a little with oil to make it easier. In this way, it becomes easier to turn the key inside the lock.
If your keys are small and delicate or the remaining pieces of the key inside the lock are delicate, you can also use tweezers.
Use a screwdriver to remove the broken key
Another very convenient tool for removing a broken key from a lock is a screwdriver. This device is used in situations where access to the rest of the key is difficult. In such cases, you cannot use a narrow tail or pliers.
As a result, a screwdriver must be used. Repeat the same procedure to remove the key as you unscrew a screw with a screwdriver. Insert the meat pie into the locking hole and press a little. Then start turning it
If the door is locked and you want to open it before removing the key, turn the screwdriver in the right direction into the keyhole. In this way, the door is unlocked.
If you are in a hurry and want to leave the building early, you should follow the same procedure in reverse. In this way, the door will be locked and you can leave the building. When they come back, you can find a way to get the key out.
Use a jigsaw or jigsaw
If you are good with a saw and have hacksaws or jigsaws at home, it is not bad to use these tools to remove the broken key.
But how? Very simple!
The teeth on the jigsaw or jigsaw will catch on the teeth of the broken key, and with a little effort, you can get them out of the lock. If your hacksaw is too big, you can break it and make it shorter to make your work easier.
You can use other tools such as hairpins, cufflink pins, travel knife or paper clips to remove the broken key from the lock.
Do not forget the drop glue!
Another tool that works to remove the broken key from inside the lock is to use drop glue. Of course, you have to be careful and use this glue very carefully.
If you have a quilting needle or thin wire handy, use it. Dip the tip of the needle or wire in glue. The amount of glue used is very important because if you use too much, the wire will get stuck inside the lock. Very slowly and carefully, insert the needle into the lock and hold when you hear it hit the key. Wait a little until the key and the needle stick together and then carefully take out the broken key.
Using different tools of locksmiths
If you visit a locksmith's toolbox, you will probably come across a plethora of different tools and equipment. Among these devices, there is a device called lock pin which is used for this purpose. The teeth on this tool can get stuck on the broken key inside the lock and the locksmith patiently pulls it out.
You might think that having such a tool would not hurt. But since it is a specialized tool to remove the broken key from the lock, it is not bad to have a few of them at home.
See: National Building Regulations
Open the lock frame!
If all the above steps did not work to remove the broken key, there is no other way but to hit the lock frame. We mean the frame of the lock, the main body in which the lock is placed!
Open this frame from the door and tap it several times. Probably with this, the broken key will come out. This solution is better because your lock will not be damaged.
Using two electrodes or solder wires
Although this solution is a bit more complicated, it can be a solution. Get two pieces of thin wire and insert them into the lock in such a way that both sides of the teeth of the broken key are stuck. You don't need to take the wires too far from the switch. Be careful that only a little bit of the key comes out of the lock.
In the next step, repeat the same process again until the key comes out completely. Additionally, you can slowly pull the key out instead of pulling it out. Use the same two wires and then turn your wrist inwards. Guide the key towards you to pop it out.
In general, we always recommend that you have a toolbox in your home that is also equipped with a pin lock. This device may be a bit expensive but in the end, it will save you from future troubles. Just be careful that the size of your lock pin matches the teeth of the broken key.
Use a drill!
If none of the above methods work to get the broken key out of the lock, there is no other way but to use a drill. Of course, don't forget that when you use a drill, your lock will definitely break. Also, be careful that the drill bit you use for the drill is thin.
Notify the locksmith!
Yes! This is another solution!
If none of the above methods work or you simply don't want to involve yourself in this issue, you should go to professional locksmiths. Call one of them and explain the situation. The relevant locksmith will probably come to you with a bag of professional equipment and solve the problem very quickly.
Frequently asked questions about removing a broken key from a lock
Maybe you still have various questions related to extracting the broken key. In the following, we have tried to list and answer the most common questions that you may have:
What is the best way to remove a broken key?
At the top of this text, we mentioned several solutions to remove the broken key. The best way is to remove the key without damaging the lock. Skilled and professional locksmiths can do such work. But if you don't decide to call a locksmith, you should use all the tools and equipment at your disposal to get the broken key out.
How long does it take for a broken key to come out of the lock?
It all depends on the tool with which you want to extract the key. Generally, a locksmith can put you at ease and get the key out in less than a few seconds. But if you want to do it yourself, the duration will depend on your equipment and skills.
How can I enter or leave the house after the key is removed?
In this situation, you must have a spare key. Or ask a professional locksmith to make a key for you. You can also remove the lock from its frame and take it to a locksmith.
See also: Sliding frame and how to install it
last word
Finally, we must mention that getting the broken key out of the lock can be a challenging task. Especially when you don't want to damage the lock and its frame. Many of us, when faced with this problem, apply excessive force and pressure and eventually break the door lock.
While this kind of work requires delicacy and accuracy more than anything else. Apply the steps and tricks above and be sure that your problem will be solved.
Otherwise, you can contact a professional locksmith to solve the problem for you. Rasta Choob is one of the top manufacturers of construction doors. The effort of this group has always been to make quality and strong locks and keys used in building doors so that you don't face these problems in the future.
How useful was this article?
1 --- 5
Average rating 0 / 5. Number of points 0
No points have been registered so far. (be the first)