Mitre cuts in wood and their use in wooden frames and architraves

0 (0)

Wood is one of the main materials that we use in various industries. From the shipbuilding and maritime industries to the construction industry!

But as you probably know, to use wood, it must be carefully processed. In fact, raw wood cannot be used much in the industry because this material, if it is not properly processed, will not have much durability and resistance against environmental factors. That's why they cover it with different coatings, cut it into different shapes, heat it and paint it to finally make it suitable for industrial use.

But have you ever heard of mitre cut on wood? Have you ever looked at the door frames or architrave of them? What is mitre cut and why is it used?

In this article from the website Rasta Choob We want to talk about mitre cut on wood and its application in wooden frames and architrave. If this article is interesting to you, we recommend you to follow this article until the end. Because we are going to tell you some interesting things about mitre cut.

If you intend to view or buy a variety Construction door you have click

What is a mitre cut in wood?

As you probably know, various tools and equipment are used to shape wood. One of the most important tools used in the wood industry is the mitre saw saw. As its name suggests, the Persian Bor saw cuts wood into pieces with specific dimensions. In fact, mitre cut is a type of cutter that cuts wood at different angles.

That is why it is used in the industry of construction doors and frames.

When using wooden parts, it is very important that they are cut accurately. That's why mitre saw advanced saws are used. When we mention mitre cut, we actually mean angled wood sections.

mitre saw saws can be easily carried and are a simple and accessible tool. Of course, you can get electric or manual saws. In any case, if you are looking for high precision in cutting wood, it is recommended to use its electric type.

In general, Persian connection is a type of connection where two pieces of wood are angled and connected through this angle. This connection is most often 90 degrees. For this reason, the angle mitre cut will usually be half of this connection, i.e. 45 degrees.

If you want to see a simple example of mitre cut in your home, look at the photo frames in your home. As you can see, the frames have angles of 45 degrees. But when you put each piece of this frame next to another, they lock perfectly and form an angle of 90 degrees.

This type of cutting has been used since ancient times and was used in many places. One of its main uses was in making wooden door frames. Of course, such cuts are still used to make frames. In fact, due to the rectangular structure of the door frames, we need such cuts so that they can be placed on top of each other.

One of the points related to the new mitre saw saws is that it is possible to determine the cutting angles. In the past, old manual saws could only be used in one direction.

Different parts of a mitre saw

mitre cut saws consist of different parts. Each of these parts is different to increase accuracy mitre cut.

The first part of the saw that is important is the piece on which the wood is supported so that it does not shift or shake during cutting.

The second important part is the plate on which the pieces of wood are placed and graded. In this way, you can accurately calculate the cutting angle.

The main blade of the saw is attached to an arm. The arm itself is also connected to another listed page. The arm can be rotated in different angles to finally find the right angle. The end of the blade is also connected to a lever. It is enough to push the lever down so that the saw blade lands on the piece and makes the cut.

In general, there are two pages listed in the mitre saws. One of them is horizontal on the surface for longitudinal measurement. The other one is placed vertically and is used to determine the cutting angle. Therefore, the existence of both included and angled plates is very necessary and necessary and increases the cutting accuracy.

But the body material of mitre saw saw is usually aluminum. In general, the structure of mitre saw electric saws is not so complicated and usually it is made in two types of armature and dynamic.

Dynamic motor: This type of mitre saw saws is connected to the machine blade through a belt.
Armature motor: this type of saw mitre saw, the connection of the motor to the blade is direct.

In addition to the mitre saw saw motor, they also have different blades:

Wood cutting blade: This type of blade, as its name suggests, is used to cut wood, and other materials such as MDF cannot be cut using this blade. Because its place remains.
MDF blade: This type of blade is for cutting MDF. Usually, architraves and frames made of this type are cut using these blades.

Note: Some of the mitre saw saws work in the form of lasers, which have very high precision in cutting. Naturally, the price of such saws is more expensive.

mitre saw wood cutting

How to make a mitre cut

Persian cuts are used in different places. Door frames and architraves are usually cut this way. Because the Persian connection, in addition to having a unique beauty, is also stronger. Meanwhile, Iranian architecture is more familiar with such connections.

For this reason, the four main parts of a door frame are usually cut with mitre joints during installation.

How is a mitre cut made? An important point in the mitre-cutting process is to use power saws.

The accuracy of these saws is much higher. Of course, mitre cut is very difficult with hand saws and not very accurate.

For mitre cut, you must first release the saw table lock in order to turn the motor and blade. After you reach the angle you want, do the cutting. This way the piece stays in place but you can choose different angles to cut.

Table saws, which are a special type of mitre saw saws, are also used for cutting. The way to use them is that you must use a mobile conveyor on the table.

See: Door sill and its installation principles

In the following, we have explained step by step how to mitre cut:

Step 1: Adjust the angle of the saw

In this step, you need to find the right angle. To do this, use a gunya. Then halve the read number. For example, if the found angle was 90 degrees, halve it and set it to 45 degrees. After you cut the two boards at an angle of 45 degrees, together they form an angle of 90 degrees.

To cut, open the lock on the included screen and rotate the screen to a certain extent to get the right angle. Then place the blades on the desired angle. Then twist the corresponding knobs until the blade is fixed in place.

Note: some blades rotate by default on commonly used angles to make your work easier (angles such as 15, 22.5, 30 and 45 degrees)

Second step: piece Put the stick on the device!

In the next step, it is time to place the wooden pieces on the machine. In fact, the cutting table is designed for such work. Before turning on the saw, lower the blade and adjust the workpiece so that the inside of the blade lines up with the cut mark on the workpiece.

Sometimes, after cutting, the piece of wood may fall on the ground. To prevent this, install the retaining clip and close it on the piece.

step Third: Do mitre cut!

With the same hand holding the blade, press the safety trigger and then the blade trigger to turn on the saw. Keep a safe distance from the blade. You may cut your hand by mistake.

First, let the saw blade rotate for a few moments to find the desired speed. Then very slowly and carefully lower the blade to cut the piece.

mitre saw wood cutting

Types mitre saw

It might be interesting for you to know that mitre cut itself is divided into different types. In fact, there are two types of cutting, longitudinal and vertical. In the following, we have mentioned some of the most important Persian cuts:

mitre cut Slider

The main feature of this type of mitre cut is that it takes the parts longitudinally. The way of placing the cutting blade on the wooden pieces is horizontal and as if it moves on a rail. For this reason, the other name of mitre saw slider is mitre saw rail.

mitre saw Slider has the ability to easily cut longer pieces of wood. In fact, most of the time, this type of mitre saw is used to cut the parts of the door frame and architrave.

Fixed mitre saw

Another variant of mitre cut has a smaller longitudinal cut range. But the accuracy of its operation is very high and it is designed for delicate work. This type of mitre saw is mostly based on the operation of the blade and arm, which rotates on one axis. For this reason, the pieces of wood that can be cut through this method are smaller.

Fixed mitre saws, unlike sliding mitre saws, occupy very little space and usually do not take up much space in the sawmill. As a result, it is more compact and economical than sliding mitre saws. In fact, mitre saw the rail took up a lot of space on the back of the device. Because the direction of rail movement should be free and therefore it needs more space.