Install Security door without destroying the framework

Anti-theft doors One of the newest products in the market are construction doors. Doors that are of very high quality and have been able to prove their efficiency many times.

• Types of anti-theft doors and their frames
• Installing Security door on old framework
• Replace the normal door with Security door
• Step by step replacing old doors with Security door
• Install Security door without destruction
• Replacing the door of the apartment without destruction
• Installation cost Security door without demolition

But how much do you know about how to install them? Can new anti-theft doors be installed on old door frames? Is it possible to install Security door without destroying it?

In this article from Rasta Choob We want to address the issue of installing Security door without destroying the main framework. If decided to Buy Security door You have, before anything you need to know if it is possible to install this door without destruction or not!

Continue scrolling this text and stay with us.

Types of anti-theft doors and their frames

One of the very important points about anti-theft doors is that they have different dimensions. In fact, since the variety of anti-theft doors is large, their dimensions will naturally be different. The same issue is also effective in the dimensions of the frames of these doors.

In general, three types of Security door are available in the Iranian market:

• Security door Iranian
• Security door Leave
• Security door Chinese

Each of these construction doors have different dimensions. Therefore, if you want to replace the old door of your home with one of these anti-theft doors, you should pay attention to the dimensions of this Security door before anything else.

Installing Security door on old framework

As we mentioned, installing Security door on legacy frameworks depends a lot on the version of Security door. So if you want to make sure that it is possible to install the Security door without destruction, first of all consider the dimensions of the door:

Security door Chinese

The dimensions of this door are usually 105 in 210 cm. Of course, these dimensions are for standard Chinese doors. Its various dimensions are usually 105 in 205 centimeters. Also the dimensions 110 in 210 cm can also be found in the market.

To install this door on the old frame, you must first see what the dimensions of the old frame are. The noteworthy point here is that usually the dimensions of Security door china are in harmony with the dimensions of old frames. Therefore, there is no need to destroy.

Security door Leave

Another anti-theft door available in the country's market is Security door Turk, which has standard dimensions of 115 in 220 cm. Its various dimensions are 110 in 220 cm.

In general, you should not forget that in order to install construction doors on the frame, the dimensions of the frame should always be slightly larger than the dimensions of the door. For example, in Chinese anti-theft doors, we need a space of 105.5 by 210.5 centimeters. This means that the dimensions of the frame should be at least half a centimeter larger than the dimensions of the door.

If the dimensions of the door frame are large enough to install all kinds of anti-theft doors on it, there is no need to destroy it. But if the dimensions of the door are bigger than the frame, you will have trouble and it is necessary to destroy it.

Note: Since most anti-theft doors are made based on standard dimensions, they are usually installed on all door frames and there is no need to destroy them.

Replace the normal door with Security door

If you decide to change your regular door and install a Security door instead, you should keep a few things in mind:

• To measure the dimensions of the frame, the inside dimensions should be taken from the most prominent part of the frame on one side (height and width) to the most prominent part of the frame on the other side. In other words, you should see how much is the useful space of the frame opening that an object can pass through
• To install Security door porcelain, the door frame should always be half to 1 cm larger than the dimensions of the door.

Step by step replacing old doors with Security door

In the following, we have mentioned step by step the steps of replacing the old door with Security door:

• In the first step, the exact dimensions of Security door should be measured. This measurement is usually done in two ways:
• In the first method, if the inside width of the old door frame is less than 105 cm; The old metal frame is cut all at once using a milling machine, and the new frame replaces the old one.
• In the second method, if the inside width of the frame is more than 105 cm, the new frame is welded on the old metal frame.
• In the second step, after the Security door frame is installed, it is time to concretize the back of the frame. To do this, construction materials such as cement and sand are used. Many times, Security door installers neglect concreting behind the frame and as a result, it cannot be said that their work is original. If the back of the frame is left empty, the amount of insulation of the door will decrease. It also increases the possibility of catching thieves.
• In the third step, after the Security door is completely installed, it is time to install the wooden architrave on the front of the door and the back of the frame. These architraves, which are placed on the metal frame, in addition to increasing the beauty of the door, also make its appearance uniform. The installation of architrave on the front and back of the door should be done according to the desired dimensions. This step is done after the concrete behind the frame dries.

Install Security door without destruction

Now that you are familiar with the step-by-step process of replacing an old door with Security door, we must mention a series of tips that lead to replacing the door without destruction:

• In order not to need any destruction when replacing the old door with Security door, you should order the desired door. This way, you can replace the old door with the new Security door without worry.
• If your Security door has custom dimensions, you don't need to remove the old metal frames. Unless the width of the door is small.
• If the width of the current door is small; The old frame can be removed in one piece with a burr. In this way, there is no destruction again. After that, the door frame will be filled with different materials. These materials may be materials such as compressed polyurethane foam or sand and cement.
• Always try to use expert and skilled forces to install Security door on old frameworks. An expert force can minimize the amount of destruction and damage and save you from future troubles.

Why is it better to replace without destroying the door?

The question that arises in the meantime is, why do we recommend going for the methods that have the least amount of destruction? In fact, why is it better to replace the old door with Security door without destruction? Below are some basic reasons:

• In the non-destructive method, you don't need to remove the old frame anymore
• In this installation method, the resistance Security door increases
• The customer can order the desired dimensions and will no longer be limited to the standard dimensions.
• He can order a suitable cover and architrave according to his needs and taste.
• In replacing the old door with Security door, it is possible to use the skeleton and steel frames without destroying it.
• It will also be possible to use all-over steel sheets.
• Security door installation costs are reduced
• It is less hassle and dirty work!

In general, the advantages of replacing the old door with Security door are very high. Therefore, we always recommend that you go for methods that allow you to replace your old doors with Security door without the need for destruction.

Replacing the door of the apartment without destruction

One of the doors that we usually decide to replace are apartment doors and unit entrance doors.

In the past, most homes used regular doors to enter their units. But now and with the advancement of technology, the use of anti-theft doors has become more popular and you should start using these doors.

But how to change the apartment door without destroying it:

If the width of the inner space of the frame is more than the required amount, the cans can be welded and their size can be adjusted to the desired dimensions. Then installed Security door on it.

But if the internal dimensions of the frame are smaller than the required size, we have two possibilities:

• The first possibility is when the difference between the door and the frame is less than 3 cm. In such a situation, the pot part of the frame will be cut with a steel bur without damaging the surrounding walls. Then we make the size inside the frame to the desired dimensions. Finally, we weld Security door on the frame.
• In the second case, there is no other way except destruction because the dimensions of the door are much larger than the frame and it cannot be installed by any other method.

Be careful that in such a situation, a part of the old frame can always be seen from outside and inside. Therefore, to cover the old frame, you should use various types of mdf covers or architrave that are the same color as the door.

Meanwhile, another important point that comes up when replacing the old door with Security door is its insulation. If you want to install the new door on the old frame, you must use insulating materials to make sure that the heat and sound exchange does not take place.

It is usually recommended to fill the inside of the Security door frame with foam to cover all the holes. In this way, the possibility of dust penetration or thermal energy loss will be minimized.

Of course, in the meantime, some anti-theft doors such as Chinese Security door are equipped with rubber seals and steel thresholds, which provide good insulation for the environment.

In general, don't forget that anti-theft doors can do the best possible job of keeping your home safe. Provided that they are installed correctly.

Installation cost Security door without demolition

If you want to replace the old door of your house with a new anti-theft door, first of all you should make sure that you will not need to destroy the door frame. If you don't need demolition, Security door installation costs will not be so high.

But if it is necessary to destroy the frame, you will have to spend more money on materials and installer's wages.

last word

Finally, we must mention that the installation of Security door without demolition is possible when the dimensions of the old door frame are in harmony with the dimensions of Security door.

Rasta Choob, as one of the oldest construction door stores, can be your best reference for ordering all kinds of anti-theft doors. You can order the dimensions you want from Rasta Choob experts and get the Security door you want as soon as possible at your doorstep.

Meanwhile, Rasta Choob installers are ready to accompany you in the door installation process.