Wooden doors are one of the most common construction doors available in the market. In addition to their unique beauty and the intimacy they bring to the environment, their fundamental flaws cannot be overlooked.
- How to understand wood warping?
- The cause of wood warping
- How do wooden doors swing?
- Warp prevention Wooden door
One of the main problems that can plague a Wooden door is warping. You have probably seen the problem that after some time, if exposed to harmful environmental factors, wooden doors become warped and sometimes swell.
But how to prevent the door from warping? Is there any way to fix this problem? What is the cause of the door warping problem?
In this article from the website Rasta Choob We want to talk about the same thing. If you have a wooden construction door that has this problem, be sure to follow to the end of the article so that we can teach you some great solutions to solve this problem.
for Buying room doors and services click
How to understand wood warping?
Many of us don't know what wood warping is like. Therefore, even if Wooden door our house has this problem, we will not be able to detect it.
But if you don't know how to find out the presence or absence of wood warping, there is no need to worry because with a simple solution you can completely understand this issue.
In the first step, you should take a piece of wood and place it on a smooth and even surface. If you notice that one edge is lifted from the wooden board, it means that your wood is warped. Then you can perform the same solution for all the sides of the board to make sure that it is not warped anywhere else.
Read more: How to install Security door
The cause of wood warping
If you notice, for any reason, that the surface of your wood has problems such as warping, swelling, distortion, or deformation, it's time to think about fixing it. But before anything else, you should know why wooden construction doors may be warped. Causes such as:
The desired door is located in an environment with bad weather conditions
The main reason that may lead to Wooden door warping is that it has been exposed to weather conditions. For example, this problem is probably more in the northern cities of Iran because there is a high level of humidity in these areas. Or, for example, a sudden decrease and increase in air temperature can damage the wooden texture of the doors. In the cold seasons of the year, the wood of the construction door shrinks and in the hot season, it expands. It is natural for wooden doors to crack or at best become warped in such conditions.
This is also true for wood products such as mdf.
The wood used in the door is of poor quality
Another reason that may lead to warping of the door is the low quality of the wood. As you probably know, different woods are used in the construction of building doors. Some of these woods are not of sufficient quality and their fiber connection is not strong enough. In fact, the main reason for the warping of the doors is that quality and resistant wood was not used in their construction.
The quality of these doors will be determined over time. For example, one of the doors that usually suffer from this problem are doors made of Russian wood. This wood will decrease in quality over time.
Failure to take care of building doors
Another reason that may end up warping the door is that the doors are not properly cared for. All wooden doors and doors made of wood products, if they are exposed to harmful factors such as water or sunlight, they become warped. Therefore, it is better to choose the desired door according to the environment conditions. The best humidity level for maintaining wooden doors is 8 to 10 percent.
See: What is electrostatic paint?
The invasion of insects and corrosive creatures into the wood
One of the main places where insects and corrosive creatures can live is wood. In fact, the main enemy of wooden doors is the invasion of insects, which eventually leads to warping of the door. If ants, termites or carpenter bees penetrate into the wood tissue, after some time they can destroy the fiber connection of the wood. So if you know that your door has been attacked by these insects, try to destroy them immediately.
Failure to comply with the principles of preparation during wood processing!
You should know that many construction doors are currently made of industrial wood or wood products such as fiberglass, MDF or HDF. Therefore, if the basic principles are not observed in their construction, they will become warped very quickly. If the edges of wooden products are distorted, you can no longer prevent them from warping.
How do wooden doors swing?
It might be interesting for you to know that these wooden doors are warped in different ways. That is, the form of this distortion is different. Therefore, to solve this problem, you must know the shape of the door swing.
- Forging: In this type of warping, you can see the movement of fibers in the relief of one edge of Wooden door.
- Cupping: This type of warping is where the wood deviates from a straight line across the wood piece.
- Bowing: the way the wood deviates from its original surface will be longitudinal.
- Warp: In this type of warping, the wood will deviate from the edge and relative to a straight line, from one end to the other.
- Curling: If you look at all four corners of the wood, you will notice that they are no longer in the same plane.
Warp prevention Wooden door
When they want to make the desired Wooden door, a series of preliminary steps must be taken to ensure that the wood in question will not warp in the future. These steps include the following:
Drying wood in the oven
If green and fresh logs are to be used for wood preparation, it is better to put these logs inside the wood drying ovens before anything else. These furnaces can absorb moisture from the wood. In this way, the wood obtained will be resistant and strong.
Of course, this does not mean that the wood in question will not get wet in the future. That is why you should know other methods of drying wood. Keep the following things in mind when drying wood:
- The wood should never be left half dry. Rather, it should be dried to the right humidity.
- Also, the drying speed of the wood should not be too slow.
- If you dry the wood too much, it will gradually split and crack.
Examine the wood
When you decide to buy Wooden door, you must check all its parts. Sometimes you can also use hygrometers.
To view types Internal and wooden doors click
Take care of the warehouse of wooden doors
One of the main tasks that must be observed when manufacturing wooden doors is that their warehouse is completely dry and with air conditioning. In this way, you will be sure that they will not be warped.
Types of methods to fix wood warping
When you face the problem of warping wooden doors, you will have only a few solutions to solve this problem. In the following, we will refer to the introduction of these methods.
heating
When the door you want to warp, you should pay attention to the shape of the warp before anything else. It should be noted that it is not always possible to solve the problem of warping wooden doors, but one of the main solutions we suggest is to use heat.
To heat Wooden door, it is better to follow the following steps:
- In the first step, remove the Wooden door from its frame and place it on a flat surface.
- Then apply direct heat on the warped areas. Continue this until the surface of the wood is hot.
- Wait for the wood to cool down and return to its original state.
Warning: Do not overheat the wood. Because it may burn.
See also: The best wood for making Wooden door
Use an iron
One of the great ways to fix the Wooden door warping problem without damaging the door itself is to use an iron. To do this, cover the lid with wet towels. Do not forget that none of the parts of the door should be left without a towel cover.
Be careful to go for towels or fabrics that are resistant to the heat of the iron and do not get burned. Also, the moisture level of these towels should not be too high. It is enough that they are not visible.
In the next step, it is better to place the convex surface of the door upwards. Set the iron to its highest temperature. If you have a steamer, your work will be much easier. When the iron is completely hot, press it on the warped surface and drag it on the surface. Be careful that the level of pressure you apply on the door should be uniform.
Each time you press the iron, it is better to hold it for 5 to 10 seconds.
Don't forget to iron all parts of the door and don't just stick to the curved parts. If necessary, do the ironing step several times.
In the last step, open the towels around the door and let the door completely dry and cool.
Be careful that this method may not be useful for all wooden construction doors. So if you tried once or twice but did not get results, it is better to look for another method.
Use sandpaper
Another method that is used to fix wood warping and usually has a good response is using sandpaper. Of course, this method is difficult and complicated and may require professional help.
To do this, you need to remove the door from its frame and place it on a flat surface. Then sand the uneven surface. Of course, during this process, part of the door color may be scratched by the sandpaper. For this reason, it is usually necessary to have a painting operation as well.
Check the bumper and door lock
Sometimes the main reason for the door to warp is that the bumper and the door lock are not in the right place or they are not fastened together well. In this way, the door is slightly tilted and seems to be warped.
In such a situation, it is better to change the position of the bumper a little and then check the condition of the door again.
To do this, you must open the bumper first. Then, put the screwdriver in the upper holes and hit it with a hammer. The pressure caused by the impact causes the bumper to move slightly downwards and the problem of the door is also eliminated.
last word
Finally, we always recommend that you go to reputable brands that use high-quality wood to buy construction doors. Rasta Choob can be your best reference for buying all kinds of construction doors.