3.5 (2)

What is the basis of a construction door?

In addition to maintaining security and peace of the environment, what else do you expect from a building door?

Perhaps the most important job of a building door is to open and close on time and we don't have any trouble to do this simple task.

That is why usually Construction doors They make it light so that they don't have any problem to open and close. Or that special fittings are used so that the doors close easily and do not cause any problems.

But in the meantime, sometimes a door may not close easily and you have to deal with it. In such a situation, it is better to look for solutions to solve the problem of the door not closing.

In this article from Rasta Choob We want to talk about this problem and tell you what you should do to solve the problem of the door not closing. But before anything else, it is necessary to talk about the reason why the door does not close. Because by knowing the cause of a problem, it will be easier to solve it. Stay with us.

What is the reason for the door not closing?

You must have seen this problem in different doors. The refrigerator door does not close properly, the front door closes with pressure and effort. Even the garage door that works with an electric motor may have this problem.

So the main question here is why the door is not closed?

What is the problem in the structure of these doors that causes it not to be closed?

To answer this question, we must first examine the structure of the door and see what tools and fittings lead to its closing.

One of the main reasons for the door not closing is due to a problem with the door hinge. It is possible that one of the screws or hinge components of the door is damaged, thus preventing it from closing properly.

Another reason for the door not closing can be related to its regulation being messed up. Unfortunately, in big cities like Tehran, we are witnessing a phenomenon called land subsidence, and every year, our buildings go down a few millimeters. As a result, it seems that the door is out of its adjustment state and finally does not close properly.

Therefore, if you notice that the door of the house does not close properly recently, you should think about adjusting its regulation.

Regardless of these two things that we have mentioned, it is possible that the reason for the door not closing is due to its decay. Especially if the door of the house is made of wood, after a while it will swell and it will not close properly. Especially if Wooden doors use in humid environments, this problem will be quite common and normal.

That's why, before considering solutions to solve the problem of the door not closing, it is better to look for the cause of this problem first.

Viewing and buying all types of interior doors

Solutions to solve the problem of the door not closing

Now let's introduce some solutions to solve the problem of the door not closing. Stay with us.

Spray oil on the door hinge

Hinge wear is another main reason for building doors not closing. When the hinge of the building door does not work properly, the door will not close properly and will have problems. In such a situation, one of the best solutions you have is to spray special or edible oil on the door hinge. After doing this, open and close the door a little so that the oil reaches all the surfaces of the hinge and thus the problem is solved.

Usually, when the door stays slightly open and does not close completely, the problem is with the hinges.

Use lipstick

It may seem strange to you, but you can also use lipstick to solve the problem of the door not closing. One of the main reasons why the door won't close is that the lock and the keypad are not aligned. In this way, you should use a lipstick and apply it to the edges of the door lock to find out if they are aligned or not! Then put an adhesive tape on the lock screen.

Now is the time to review. Open and close the door several times. If there is a distance between the lipstick stain and the hole, measure this distance. If there is no gap, you need to see if the lock has gone far enough into the hole or not!

In this way, you can solve the problem of the door not closing

Read more: All about architrave Security door

Lubricate the lock.

Basically, wear and friction can quickly damage the fittings of building doors. Therefore, continuous use of oil can greatly help the smoothness of the hinges and the correct operation of the door. Basically, in order to prevent problems such as the building door not closing, you should oil the door lock once every six months.

There are no specific oils to do this, but multi-purpose oils are probably the best option. If you want the oil to fall on the lock only, you can tape around it and after applying the oil to the lock, remove the tape and clean the area around it.

A very important point in this is that you should never mix and use different oils. Always use a special oil for the door lock.

Also, don't forget that there are other materials like graphite powder to soften the lock. Of course, be careful again that if you use oil, do not go for graphite powder because it will only cause the lock to fail.

See: How to change the lock brain

Cut the cover or the color of the door!

Old doors were usually waterproofed with paint. Especially if the door of the building was made of wood. For this reason, if the building door does not close properly, it may be time to scrape and remove the paint around the door lock. To do this, use a utility knife and clean the surface around the lock of any paint.

If after doing this, the door still does not close properly, it is better to change your lock. Because some old locks still don't work properly and don't soften even after shaving the paint.

The correct operation of the door largely depends on its lock. So try to buy the best door lock so that you don't have these problems in the future.

Door not closing

Checking the door bolts!

You must have seen that some door locks are closed too high or low compared to their screen. Usually, when we want to open such locks, our hand moves unconsciously, but unaware that the door lock is a few centimeters lower.

Therefore, if the door of the building does not close properly and you think that the main problem is with the door lock, it is better to check all the screws of the hinge and make sure that they are closed properly.

Sometimes you notice that the screws of the hinge are closed correctly, but there is still a problem. In such a situation, we recommend that you loosen one of the screws and move about 7 cm up or down (according to the location of the lock). In this way, your problem will probably be completely solved and the door will open and close easily.

Make the keyhole bigger

Sometimes, no matter what you do, the problem of the door not closing cannot be solved!

This is where a more basic and better action should be taken. If the lock does not fit into the hole or if you have to force it to fit, it is better to make the hole bigger. A small drill is usually used to enlarge this hole. After drilling, you can sand the edges of the hole to make it easier for the lock to enter.

Make the lock bigger or replace it completely.

One of the very special features of old locks is that they don't come out of the hole more than a certain limit and to access them, you have to practically lock your hand inside the hole. If there is such a problem and the old lock cannot keep the door completely closed, you need to install another lock plate along the first one. But you must be careful that the new lock screen must be similar to the old lock screen.

If you can't find a new lock screen that matches the old one, you have no choice but to change the lock. By changing the lock, you will notice that the door closes easily and will not have the previous problems.

Change the location of the lock screen

Sometimes you notice that the lock of the corresponding door does not go into the screen enough or it gets stuck. In such a situation, it is better to open the lock screen and move it up or down as needed. Or move it in or out so that the corresponding lock is in its proper place and the process of closing the door does not face any problem.

Not closing the door

Why should the problem of not closing the door be solved immediately?

Now that you are familiar with the solutions to solve the problem of the door not closing, you may be asked why you should take immediate action to solve this problem? When the door of a building does not close properly, you have to apply more force. This force will be accompanied by more noise. In addition, it may cause irreparable damage to the structure of the door and in any case, it may lead to harassment of the neighbors.

If the building door closes with noise, pay attention to the following points:

last word

Finally, we must mention that the problem of not closing the door especially Security doorIt is not so complicated and you can solve this problem yourself using the tools you have at home. Of course, if the door of the building does not solve the problem with the above methods, it is better to think about buying a new door. Rasta Choob, is always at your service and tries to offer you the best construction doors.

How useful was this article?

1 --- 5

Average rating 3.5 / 5. Number of points 2

No points have been registered so far. (be the first)