5 (1)

When you decide to buy construction doors, you will probably come across various equipment and accessories that are necessary and essential for the correct operation of the door. This is why construction doors are not limited to their body. From the lock and cylinder to the frame and various architrave!

In this article from Rasta Choob We would like to mention another component of construction doors. If you are new to the construction door market and want to buy a door for the first time, you probably haven't heard the name of Bao and Pasar. But by the end of this article, you will understand exactly which section of construction doors we are talking about. If this topic is interesting to you or you decide to buy construction doors, be sure to follow our article until the end.

What is Bao?

As you probably know and we have mentioned it many times during Rasta Choob articles, one of the main parts of any building door is its frame. In fact, without installing the frame, you cannot expect the door to be in place. That is why installing the door frame is very important.

But what is the connection between Bao and the door frame?

To buy all kinds Building doors click

In fact, bao is the same wood that has been cut into certain dimensions so that you can use it to make a door frame. If you look at one of your door frames right now, you can probably see Bao. To make the door frame, there will be two ways:

First of all, they can use different timbers and cut them to the desired dimensions using special saws.

The second method is to use Bao. Bao is the wooden logs that have smaller dimensions and are cut according to the size and dimensions of the door frame and are used for this purpose. In this way, it is no longer necessary to cut the timber to make the door frame. You can go directly to buy Bao and install it for the door frame. In this way, the process of installing building doors becomes faster.

Read more: Door with polished color and how to implement it

What is Bao made of?

Another question that is raised in the meantime is what kind of wood these devices are usually made of. If you have ever seen bao timber, then you know very well that they are very light and do not weigh much.

Bao is usually made from the wood of various trees. But in order to be economical, they usually use beech, Russian, yulka, beech billet and finger joint beech wood to make the bao. In general, if you are looking for economical and convenient options, baos made of Nerad and Russian wood are considered the best option.

Of course, some baos have very high quality and naturally this quality is due to their high quality wood. If you are looking for strong and durable frames, we recommend using hardwood baos.

What are the dimensions of the bao?

As we have mentioned, Bao is used to implement and install the door frame. So when you want to buy Bao, you should first know the size of the door frame. Most construction doors use a standard dimension. But if the door you want is wooden, it is better to prepare baos in the following dimensions:

It is better to go to a reliable store in order to be able to get suitable door frames. In general, each Bao packet contains 8 numbers. Of course, this number is used for the construction of entrance doors and rooms.

The packaging of the wardrobe doors is 10.

Bao and Pasar

What is Pasar?

When we talk about pasar, we are actually referring to a kind of profile that is necessary and essential for locking the door to the frame. These pasars may be made of different materials. In general, Pasar is a type of profile that is used in the upper or lower part of the door and has a groove. When the door is closed, the frame is placed inside this groove and strengthens it.

Pasar aluminum profile

One of the most famous and common profiles used is made of aluminum and is usually used in glass facades. It is most commonly used in the glass facade of shops or automatic glass doors. Glass is a very sensitive and fragile material. Even though tough and strong glass is used for such views, we still need frames to keep them in place.

These frames are made of aluminum, which is called Pasar profile. These profiles of pasars are prepared in different sizes and therefore, they can be ordered.

If you look carefully at Pasar profiles, you will notice that they are similar to aluminum stud profiles that keep the tempered glass in place on both sides. They use a special type of rubber so that the gap between the glass and the profile is not empty and the glass is not scratched.

Pasar profile is usually installed on the wall or floor. After that, they put the glass of Sekurit inside it. Glass that is used as the door of commercial places or passages. After placing the tempered glass inside the Pasar profile, they cover the gap with a special type of rubber so that it does not vibrate.

In fact, if we want to point out one of the most common uses of Pasar, we must say that it is usually used in glass and security doors, and its main task is to prevent glass friction and to strengthen its placement.

As we mentioned, aluminum metal is usually used to make pasar. Because it is more beautiful and more resistant to various factors. At the same time, Pasar zinc is covered with electrostatic powder colors or during the electroplating process to increase its resistance.

See: What is the touch of knocking on the door?

Purchase Pasar aluminum

As we mentioned, pasars can be purchased in different dimensions and sizes. First, you need to make sure that the door you are looking for is compatible with your glass door in terms of size. After that, you should pay attention to its gender.

The very important point here is that aluminum pasars are prepared and produced in different stages, some of the most popular of which we have mentioned below:

Be careful that these sections are also known as Pasal aluminum profiles.

In the following, we will explain more about each of these Pasar profiles:

Bao and Pasar

Pasar aluminum profile with dimensions 3.5 cm

One of the most common profiles available in the Iranian market is Pasar Aluminum 3.5 cm. If we want to take a look at this type of profile from a technical point of view, we must mention its resistance and strength, which is very well able to keep the glass inside itself and prevent the glass from breaking from any 4 side. It will also maintain its function for many years. In general, this profile has the following parts:

This profile is installed on the floor or wall and then secured using screws or rivets.

Profile of Pasar U

Another common profile in the door and window market is the profile made in the shape of the English letter U, which is why they are known as Pasar U profile. Usually, these profiles are made of steel or aluminum and are made in the form of a U-shaped sheet. After that, aquarium glue is used to secure it in place.

In the next step, they put the glass inside them. If the relevant profile is made of aluminum, the same process will be followed and the profiles will be installed.

Although the profiles made of steel are more expensive, they are rustproof. Therefore, it is natural that they are used in wet environments such as bathrooms and swimming pools.

Profile of Pasar M

Another profile that is popular in the market is the M profile, which, although it looks very similar to the U profile, is usually made of aluminum and steel materials are not produced.

Pasar Pafili

Yes! You heard right!

These pasars have become famous with the same name because of their resemblance to elephant feet and have become very popular. If you look at it carefully, you will notice that it is wide from the top. It also narrows from the lower part.

The main metal used in the construction of these pasars is aluminum metal and it is prepared in a plated form. The most common colors of Pasar Pafili are black, silver and gold.

The way to connect these panels is by using screws and rivets that are fixed to the ground or wall. After that, the glass is placed inside them and the empty space between them is also covered with a special rubber band so that the glass does not vibrate.

See also: Types of door measurement methods

Automatic glass door frame

Another place where pasar is used is for automatic doors. Now you should know that a special tool is used to install the automatic glass door frame. The color of these pasars is usually black, silver or gold, which give a special charm to the structure of the door.

One of the main points that must be taken into account when installing the automatic glass door frame is that built-in pipes must be used.

The automatic glass door frame generally includes four frames, two of which are installed from the side and the other two from the floor. One of these frames is narrow and the other is wide. If the desired door has a thickness equal to 8 cm, a narrow frame should be used.

last word

Finally, we should mention that Bao and Pasar are important parts of building doors. Bao helps you to install the door frame very simply and quickly and go to the rest of the construction door installation steps.

Buying Pasar is also very necessary for installing glass doors. In general, these two devices are used according to the type of door and their application.

Finally, we hope that this article was useful for you. Don't forget that Rasta Choob, as one of the best and oldest stores for the supply and production of all types of construction doors, is always ready to answer your questions. You can also refer to the main menu of the site to buy all types of construction doors.

How useful was this article?

1 --- 5

Average rating 5 / 5. Number of points 1

No points have been registered so far. (be the first)